wet sanding after the second base coat

sand a base coat? - ClassicOldsmobile.com

Should i sand the final base coat before ... you sand it with? 800? would you do it wet ... is this how the base is suppose to be, after the second coat?

DIY PAINT: Do I sand basecoat before clear or not and why ...

DO NOT sand the base coat.. the only thing you should/can sand is the clear coat, ... and wet sand off the runny spots ... go with sanding the base as smooth as ...

Please help! Base coat question.

I have a lite coat of overspray, Should just spray second coat over it? or wipe off with wax & Grease remover? 2. ... Do I have to sand or wet sand the base coat?

Question on sanding primer before paint - Turbo Mopar Forums

ANd I assume that after I shoot/sand the second coat all of it ... see it in the top coat, I've never resprayed after wet sanding unless ... to base coat /clear coat ...

Should I wet sand my base coat b4 clearing?? - Club Cobra

Should I wet sand my base coat b4 clearing?? ... 2nd question: Should I ... With all your extra coats of base and clear your paint job is already too thick and if you ...

TheSamba.com :: View topic - Base coat to clear coat time

... and is it recommended or okay to wet sand base coat to rid any orange peel. ... If your final coat of base has any ... Then use your second coat of clear like ...

sanding basecoat? - Hot Rod Forum : Hotrodders Bulletin Board

You can sand base but like said above it really isn't necessary. ... I have sanded out base coat using 600 grit wet sand paper, ...

Painting cheaply with Rust-Oleum - Ninja250Wiki

... it's going to look quite dull after wet sanding. ... With base coat/clear coat ... wait about 6-8 hours, and then lay on the second coat without sanding ...

Clear coat -- sand paint before? - RC Groups

... I have a question about clear coat. Should I sand the ... I think it might depend on how long the base coat ... Or just clear coat it then sand. Note on wet ...

What to do after wet sanding your base coat - Answers.com

What to do after wet sanding your base coat? ... Can I wet sand an oil base enamel to fix orange peel looking paint and drips before clear coat is used?

WET SANDING A BASECOAT - YouTube

LEVEL SANDING BASECOATS TO ENSURE AN EVEN COLOR COAT (IN THIS CASE METALLIC AZTEC GOLD)

Can i clear coat after 4 day dry base paint? - CarForum.net ...

Can i clear coat after 4 day dry base paint? Page 1 of 2: 1: 2 > View First Unread LinkBack: ... im gonna wet sand today, and retape all the chrome joints ...

Wet sanding- how long should I wait? - Overclock.net

How long should I wait before wet sanding the clear coat and should I ... Now unless you have a nice compound + polish i wouldn't recommend wet sanding the clear coat.

wet sanding after the second base coat

Wet sanding after the second base coatYouTube. Sep 24, ... Anybody have basecoat/clearcoat auto painting experience?Fuel (I39; ...

Can I wet sand after last color coat but before clear ...

Can I wet sand after last color coat but before clear? ... It seems as though applying a wet clear to a dry base tends to wrinkle/orange peel badly.

painting - Is it necessary to sand before the last coat of ...

I don't resent sanding after the . current community. chat blog. ... If you are painting the second coat as soon as the first coat is dry then you don't need to bother.

Fixing burn throughs runs and sags in base and clear coat!

Fixing burn throughs runs and sags in base and clear coat! ... I sanded down the car with 800 grit wet sanding, ... and feathering the edges on the second coat.

Wet sanding - NastyZ28.com

Wet sanding. Hey guys. Does the ... If your basecoat isn’t perfect: After two coats of base the vehicle should set overnight ... Check the progress on the second re ...

Wet sanding after the second base coat. - YouTube

95 Chevy project. Wet sanding after the base coat is complete ....

Basecoat/clearcoat paint, how to finish? - Painting and ...

... before wet sanding, ... The first one is the parts after the basecoat and the second is the completed model ... Most basecoat / clearcoat paint jobs I laid ...

What to do after second coat of paint - [H]ard|Forum

What to do after second coat of paint Cases ... You still finish sand and compound and glaze the final clear coat. Sanding between base coats and clear coats gives a ...

How to Get a Vintage Look When Painting Wood | Home Guides ...

... and then apply the second coat of paint before the glue fully dries. Sanding. After years of ... and make sure you don’t completely obscure the basecoat of paint.

How to Color Sand Your Classic Car

How to Color Sand Your ... I sanded down the car with 800 grit wet sanding, ... In my case after the base coat had flashed I shot over reduced 2055 clear over the ...

Blotchy First Coat Polyurethane - Wood Flooring Guy.com

... blotchy areas in first coat polyurethane. "With one coat of oil base polyurethane there ... Should I proceed and lightly sand and put on second coat of polyurethane?

Sweptline.ORG • View topic - Sanding Base Coat

After applying the first base coat we wet sanded with 800 grit. Today we sprayed the second and final coat. We plan on wet sanding tomorrow so we can spray the clear ...

How to Do a Good Base Coat Clear Coat Paint Job: 8 Steps

Base coat/Clear coat painting is more difficult than acrylic enamel because the paint has a tendency to run. ... Wet sanding should be done using 2,000 grit ...

talking car paint: how to wet sand and buff your car

I'm talking about basecoat/clear coat paint jobs here. You can wet sand and buff ... Base clear lends it self to wet sanding and ... second sentence "I'm ...

Sanding Base Coat Paint | HondaSwap

Sanding Base Coat Paint ... I'm not going to settle for a second rate job since this is the last time ... I guess my next step would be to wet sand ...

What is Wet Sanding ? (with pictures) - wiseGEEK: clear ...

... the sponge is too wet. After sanding a coat of mud, allow the area to dry for about an hour before continuing with a second coat of compound or before painting or ...